消减舰船变形的影响和为全舰提供高精度姿态基准

引用国内外一些文献列举的现代舰船船体变形的数据，论证了消减船体变形的影响和为全舰提供精确的姿态基准的重要意义。对舰载航向姿态基准的功能、性能与特点进行了综述。介绍了基于激光陀螺和光纤Bragg光栅传感器测量船体变形的新方法。最后，探讨了分布式姿态基准系统的技术方案。     

四川泸定县泥石流灾害成因、特征与防治建议

泸定县地处川西高原与四川盆地的过渡地带,地质环境条件复杂,分布泥石流沟127条,发育密度054条·10km-2。在遥感解译和地面调查基础上,论述了泸定县泥石流灾害成因、发生特征、危害和发展趋势,提出了相关防治建议。(1)成因表现为复杂的断裂构造导致流域内松散物源丰富,较大的相对高差提供了良好势能条件,而汛期集中强降雨则提供了动能条件,且雨量条件中当日雨量与前期有效降雨量之间具有幂函数关系; (2)发生特征表现出典型的空间群发性(包括2005-06-30群发性泥石流、2005-08-11群发性泥石流和2006-07-14群发性泥石流)与时间的夜发性; (3)危害方式主要包括淤埋、冲毁、侵蚀、堵河4种,泥石流已造成74人死亡; (4)发展趋势表现为泥石流沟多处于形成期和发展期(113条,占89%),发生的年际准周期由20a缩短至不足10a,且发生条(次)由4条(次)增加至44条次(2005年); (5)泸定县泥石流防治的突出问题表现为城镇泥石流问题、泥石流堵塞主河问题、风景区泥石流问题与冲沟泥石流问题,建议通过科学规划、风险防御体系构建、土木工程治理、监测预警等措施予以防御。     

煤层底板原位综合测试及突水危险性评估

在实施井下钻孔水压致裂地应力测量的同时,评价岩层阻水性能,确定导升带高度,做到一孔多用。测试区实际观测表明,泥岩、粉砂岩、中砂岩、灰岩阻水性能由大到小,导升高度则由小变大,平均导升高度约32m; 地应力测量表明,该测试区原始地应力状态为SH＞Sv＞Sh,最大水平主应力方向NE至NEE。突水临界指数评价表明,-550m水平采煤工作面掘进时突水的可能性较大,应当采取防范措施。     

Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models

In this study, two multi-scale analyses codes are newly developed by combining a homogenization algorithm and an elastic/crystalline viscoplastic finite element (FE) method (Nakamachi, E., 1988. A finite element simulation of the sheet metal forming process. Int. J. Numer. Meth. Eng. 25, 283–292; Nakamachi, E., Dong, X., 1996. Elastic/crystalline viscoplastic finite element analysis of dynamic deformation of sheet metal. Int. J. Computer-Aided Eng. Software 13, 308–326; Nakamachi, E., Dong, X., 1997. Study of texture effect on sheet failure in a limit dome height test by using elastic/crystalline viscoplastic finite element analysis. J. Appl. Mech. Trans. ASME(E) 64, 519–524; Nakamachi, E., 1998. Elastic/crystalline viscoplastic finite element modeling based on hardening–softening evaluation equation. In: Proc. of the 6th NUMIFORM, pp. 315–321; Nakamachi, E., Hiraiwa, K., Morimoto, H., Harimoto, M., 2000a. Elastic/crystalline viscoplastic finite element analyses of single- and poly-crystal sheet deformations and their experimental verification. Int. J. Plasticity 16, 1419–1441; Nakamachi, E., Xie, C.L., Harimoto, M., 2000b. Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses. Int. J. Mech. Sci. 43, 631–652); (1) a “semi-implicit” finite element (FE) code and (2) a “dynamic explicit” FE code. These were applied to predict the plastic strain induced yield loci and the formability of sheet metal in the macro scale, and simultaneously the crystal texture and hardening evolutions in the micro scale. The isotropic and kinematical hardening laws are employed in the crystalline plasticity constitutive equation. For the multi-scale structure, two-scales are considered. One is a microscopic polycrystal structure and the other a macroscopic elastic plastic continuum. We measure crystal morphologies by using the SEM-EBSD apparatus with a unit of about 3.8 μm voxel, and define a three dimensional (3D) representative volume element (RVE) for the micro polycrystal structure, which satisfy the periodicity condition of crystal orientation distribution. A “micro” finite element modeling technique is newly established to minimize the total number of finite elements in the micro scale. Next, the “semi-implicit” crystallographic homogenization FE code, which employs the SEM-EBSD measured RVE, is applied to the 99.9% pure-iron uni-axial tensile problem to predict the texture evolution and the subsequent yield loci in the various strain paths. These “semi implicit” results reveal that the plastic strain induced anisotropy in the micro and macro levels can be predicted by our FE analyses. The kinematical hardening law leads a distinct plastic strain induced anisotropy. Our “dynamic-explicit” FE code is applied to simulate the limit dome height (LDH) test problem of the mild steel DQSK, the high strength steel HSLA and the aluminum alloy AL6022 sheet metals, which were adopted as the NUMISHEET2005 Benchmark sheet metals (Smith, L.M., Pourboghrat, F., Yoon, J.-W., Stoughton, T.B., 2005. NUMISHEET2005. In: Proc. of 6th Int. Conf. Numerical Simulation of 3D Sheet Metal Forming Processes, PART A and B(Benchmark), pp. 409–451) to estimate formability. The “dynamic explicit” results reveal that the initial crystal orientation distribution has a large affects to a plastic strain induced texture and anisotropic hardening evolutions and sheet formability.     

Application of X-ray diffraction, micromagnetic and hole drilling methods for residual stress determination in a ball bearing steel ring

A basic understanding of distortion problems requires the analysis of a complete manufacturing process including an almost complete overview of residual stress states in the component during each production step. To reduce the measurement time in the future, three measurements methods (X-ray diffraction, micromagnetic and blind hole drilling methods) have been used to analyze residual stress states in machined AISI 52100 ball bearing rings. X-ray diffraction was used as a state-of-the-art method for machining induced residual stresses with pronounced gradients. The ring exhibited a complex residual stress state with high tensile residual stresses at the surface, a strong gradient in depth, and also showed some variation along the outer circumference due to a superimposition of machining induced residual stresses and effects from the clamping device process. Due to this surface state, micromagnetic signals depend on the analyzing frequency. A calibration of the signals was only possible with the X-ray diffraction data. The results of the three different measurement methods correlate reasonably well.     

压力场中光纤应变测量方法研究

本文对压力场环境下的光纤应变测量方法进行了研究，在理论上分析了由于测试环境的压力变化产生虚假应变的原因，提出了采用补偿的方法消除虚假应变。通过具有补偿功能的马赫－泽得干涉系统对应变场进行了测量，证明了补偿法的可靠性，为光纤应变测量方法向实用化转变进行了有益的探讨。     

An efficient method for solving the mixed direct-inverse problem of the transonic rotational flow in plane casades

The method in [1] has been extended to the case of rotational flow in this paper. A new method for dealing with the shock wave is presented. This method has the advantages of both the shock-fitting and the shock capturing methods. The direct problem and the mixed direct-inverse problem of the rotational flow in a transonic plane cascade at both design and off design conditions are solved, and the results show that the present method has rapid convergence rate and high accuracy even for the flow with moderately strong shocks. The calculations have been carried out on the DPS-8 computer, and for the direct problem, only 50–80 iterations are needed, and 50–80 seconds of CPU time are required.     

Homoclinic orbits for some （2＋1）-dimensional nonlinear Schrodinger-like equations

Chaos is closely associated with homoclinic orbits in deterministic nonlinear dynamics. In this paper, analytic expressions of homoclinic orbits for some （2＋1）- dimensional nonlinear Schrodinger-like equations are constructed based on Hirota＇s bilinear method, including long wave-short wave resonance interaction equation, generalization of the Zakharov equation, Mel＇nikov equation, and g-Schrodinger equation are constructed based on Hirota＇s bilinear method.     

A rigorous assessment of the benefits of miniaturization in the Kolsky bar system

A rigorous experimental and numerical assessment is made of the benefits and limits of miniaturization in the Kolsky bar system. The primary issues that arise in very high strain rate testing (stress equilibration, inertial effects, wave dispersion, friction, and controllability of deformations) are addressed through experiments coupled with explicit finite element analyses. A miniaturized Kolsky bar system that includes the input bar is developed, together with the use of the laser occlusive radius detector to obtain local measurements of specimen strain during the very high rate deformations. It is demonstrated that this miniaturized Kolsky bar system can be used to provide fully validated results, including the explicit determination of equilibration, over a very wide range of strain rates (1×10³ to 5×10⁴ s⁻¹). The desired high strain rate can be achieved even at low accumulated strains, and the total strain developed can be controlled very effectively. Specific conditions are developed for determining the range of utility of the technique for a given material. The technique is applied to the characterization of 6061-T651 aluminum, and the results are compared with the results obtained using a conventional Kolsky bar.     

Espaces d'écoulements dits « universels », 3

Universal motions with uniform steady vorticity form a corolla of linear spaces derived from rigid body motions. Closely related to potential flows, they satisfy two extensions of Lagrange theorem, are investigated with the help of complex functions, as stand celebrated when be plane. They take place in hydrodynamics, aerodynamics, geophysics, astrophysics, turbulence, physics of plasmas and superfluid helium. In all the cases, arbitrary unsteady span-wise translations permit to generalise as well as to exhibit helical or 3D universal motions. Three misunderstood periodic flows illustrate our purpose, as they approach shear instabilities in numerous fluids. To cite this article: M. Bouthier, C. R. Mecanique 332 (2004).